Product Description
Custom Coat Black Bed Liner is a premium durable long-lasting textured 1.67 VOC 2K (two-component) protective urethane coating. Custom Coat is a very versatile product that can be used for an endless amount of applications but is primarily manufactured for application onto truck beds, metal, aluminum, fiberglass, concrete, wood, and most OEM manufacturers’ finishes.
FEATURES and BENEFITS
- Easy to use, as you just mix in the hardener, shake it, and then spray, roll or brush it onto a surface!
- Waterproof, heat, and UV resistant, so it protects coated surfaces from rust and corrosion.
- A flexible textured coating that will resist chipping while providing impact protection and abrasion resistance.
- Extremely durable with excellent surface adhesion and helps deaden sounds and vibrations.
- Available with a tintable base that allows you to create your own custom color or multi-colored look.
Custom Coat Black Truck Bed Liner
2 Quart (1/2 Gallon) Black Bed Liner Kit without Applicator Gun Includes:
- 2 – 24 fl. oz. Cans of Black Truck Bed Liner Base
- 2 – 8 fl. oz. Cans Custom Coat Standard Hardener
- Product Technical Data Sheet and Usage Guide Manual
Custom Coat Truck Bed Liner Coating has a 3 to 1 Mixing Ratio, 3 parts Bed Liner Coating to 1 part Hardener.
Mixing Custom Coat Bed Liner Coating couldn’t be easier, as both the liner coating and hardener are conveniently packaged separately in the required pre-measured 3 to 1 mixing ratio proportions, so you just need to mix them together, shake it, and spray it!
Textured Protective Urethane Coating
COATING SPECIFICATIONS
- Bed Liner has a 3 to 1 mix ratio and is 1.67 VOC when used as packaged.
- Practical Coverage: 110 – 130 square foot per 1 U.S. gallon (standard 4 quart size kit) @ 10-12 mils wet film thickness
- A standard 4-quart (1 gallon) size liner kit on average will cover a full-size truck short bed (about 6 feet long), but 5 or 6 quarts of liner are needed on average to cover a full-size truck long bed (about 8 feet long).
- Pot life: 45 – 60 minutes @ 72°F
- Touch dry: 1.5 hours (depending on film build) @ 72°F
- Light duty: 48 hours @ 72°F
- Regular duty: 5-7 days @ 72°F
SURFACE PREPARATION
- Clean Surface – Surface to be coated must be cleaned with high-quality quality wax and grease remover (Recommended surface cleaners CUS SP-522 Aerosol, KUS KW901or KUS KW912 Quarts & Gallons).
- Remove Surface Debris – Remove loose paint, rust, and any other debris that may affect coating adhesion.
- Sand Surface – Sand surface area with 120 to 180 grit sandpaper or with a nylon cup brush (Recommended sanding products by Dura-Gold.) For hard to reach and difficult to sand areas, use red scuff pads. The whole surface should be sanded thoroughly to ensure proper coating adhesion. Re-clean and degrease the surface before priming.
- Prime Surface – Spot prime any areas where bare metal has been exposed with a suitable self-etching acid etch primer (Recommended CUS SP-440 Aerosol or CUS SEP35 Quarts & Gallons). All bare metal, aluminum or galvanized surfaces must be primed with an etch primer or a direct-to-metal epoxy or urethane primer to ensure optimal coating adhesion (Recommended 2K DTM Epoxy Primer CUS KEP Series Kit in Quarts, Half-Gallons & Gallons).
- Mask Surrounding Surface Areas – To prevent over-spray from getting on additional surface areas, mask off all areas surrounding the application area before spraying.
roduct information
Size:0.43 Gallon Kit | Color:Black
Technical Details
Brand | Custom Shop |
---|---|
Manufacturer Part Number | KIT-BBL-2 |
Additional Information
ASIN | B00US4M53I |
---|---|
Customer Reviews |
4.3 out of 5 stars |
Best Sellers Rank | #349,974 in Automotive (See Top 100 in Automotive) #191 in Truck Bed & Tailgate Bed Liners |
Date First Available | March 16, 2015 |
Reviews
There are no reviews yet.