Custom Coat Black 0.43 Gallons Urethane Spray-On Truck Bed Liner Kit

$49.96

Sold and supplied by amazon

  • Professional Custom Coat Spray on Truck Bed Liner .43 Gallon Kit. Kit Includes: 2 – 21 fl. oz. Bottles of Black Truck Bed Liner Base – 2 – 7 fl. oz. Bottles Custom Coat Standard Hardener. Estimated coverage is 200 square feet @ 10 mils wet film thickness
  • Custom Coat Truck Bed Liner is a premium durable long lasting textured protective coating that can tolerate extreme climatic temperature conditions. It is heat, UV resistant and waterproof, so it protects coated surfaces from rust. Use it to help dampen sounds and vibrations.
  • Custom Coat was developed to provide a great looking durable yet flexible textured surface and is a heavy duty 2 part urethane coating that is easy to apply. It provides the ultimate surface protection for almost any application. Unlike other protective and bed liner coatings Custom Coat is a flexible material that will resist chipping, while providing impact protection and abrasion resistance. These features and benefits make it perfect for its most popular application as a truck bed liner.
  • Custom Coat is a very versatile product that can be used for endless amount of applications. Use it on truck beds, entire vehicle exteriors, chassis, bumpers, commercial vehicles, equipment and trailers. It’s also great for home uses as non-skid coating for floors including garage floors, concrete, wood, steps, walkways, wood decks, docks, bath tubs, basement floors, walls, tool boxes and engine compartments.
  • Easily achieve professional results with our DIY Custom Coat Kit Packages. Kits are available in various sizes from 1 quart to 2 gallon. Kits are also available with either a Spray Applicator Gun or a Paint Roller Application Set. Custom Coat also offers Urethane Tint Concentrate in over 50 colors, so you can choose either a single color or use different colors to create your own multi-colored custom look or use the colors that will make a great camouflage pattern.



Product Description

Custom Coat Black Bed Liner is a premium durable long-lasting textured 1.67 VOC 2K (two-component) protective urethane coating. Custom Coat is a very versatile product that can be used for an endless amount of applications but is primarily manufactured for application onto truck beds, metal, aluminum, fiberglass, concrete, wood, and most OEM manufacturers’ finishes.

FEATURES and BENEFITS

 

  • Easy to use, as you just mix in the hardener, shake it, and then spray, roll or brush it onto a surface!
  • Waterproof, heat, and UV resistant, so it protects coated surfaces from rust and corrosion.
  • A flexible textured coating that will resist chipping while providing impact protection and abrasion resistance.
  • Extremely durable with excellent surface adhesion and helps deaden sounds and vibrations.
  • Available with a tintable base that allows you to create your own custom color or multi-colored look.

 

Custom Coat Black Truck Bed Liner

2 Quart (1/2 Gallon) Black Bed Liner Kit without Applicator Gun Includes:

 

  • 2 – 24 fl. oz. Cans of Black Truck Bed Liner Base
  • 2 – 8 fl. oz. Cans Custom Coat Standard Hardener
  • Product Technical Data Sheet and Usage Guide Manual

 

Custom Coat Truck Bed Liner Coating has a 3 to 1 Mixing Ratio, 3 parts Bed Liner Coating to 1 part Hardener.

Mixing Custom Coat Bed Liner Coating couldn’t be easier, as both the liner coating and hardener are conveniently packaged separately in the required pre-measured 3 to 1 mixing ratio proportions, so you just need to mix them together, shake it, and spray it!

Textured Protective Urethane Coating

COATING SPECIFICATIONS

 

  • Bed Liner has a 3 to 1 mix ratio and is 1.67 VOC when used as packaged.
  • Practical Coverage: 110 – 130 square foot per 1 U.S. gallon (standard 4 quart size kit) @ 10-12 mils wet film thickness
  • A standard 4-quart (1 gallon) size liner kit on average will cover a full-size truck short bed (about 6 feet long), but 5 or 6 quarts of liner are needed on average to cover a full-size truck long bed (about 8 feet long).
  • Pot life: 45 – 60 minutes @ 72°F
  • Touch dry: 1.5 hours (depending on film build) @ 72°F
  • Light duty: 48 hours @ 72°F
  • Regular duty: 5-7 days @ 72°F

 

SURFACE PREPARATION

 

  • Clean Surface – Surface to be coated must be cleaned with high-quality quality wax and grease remover (Recommended surface cleaners CUS SP-522 Aerosol, KUS KW901or KUS KW912 Quarts & Gallons).
  • Remove Surface Debris – Remove loose paint, rust, and any other debris that may affect coating adhesion.
  • Sand Surface – Sand surface area with 120 to 180 grit sandpaper or with a nylon cup brush (Recommended sanding products by Dura-Gold.) For hard to reach and difficult to sand areas, use red scuff pads. The whole surface should be sanded thoroughly to ensure proper coating adhesion. Re-clean and degrease the surface before priming.
  • Prime Surface – Spot prime any areas where bare metal has been exposed with a suitable self-etching acid etch primer (Recommended CUS SP-440 Aerosol or CUS SEP35 Quarts & Gallons). All bare metal, aluminum or galvanized surfaces must be primed with an etch primer or a direct-to-metal epoxy or urethane primer to ensure optimal coating adhesion (Recommended 2K DTM Epoxy Primer CUS KEP Series Kit in Quarts, Half-Gallons & Gallons).
  • Mask Surrounding Surface Areas – To prevent over-spray from getting on additional surface areas, mask off all areas surrounding the application area before spraying.

roduct information

Size:0.43 Gallon Kit  |  Color:Black

Technical Details

Additional Information

Warranty & Support

Product Warranty: For warranty information about this product, please click here

Based on 0 reviews

0.00 Overall
0%
0%
0%
0%
0%
Be the first to review “Custom Coat Black 0.43 Gallons Urethane Spray-On Truck Bed Liner Kit”

Your email address will not be published.

Reviews

There are no reviews yet.

Product Categories
Navigation

My Cart

Close
Viewed

Recently Viewed

Close

Quickview

Close

Categories